Download Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI).300-410.PremiumDumps.2024-01-10.449q.vcex

Vendor: Cisco
Exam Code: 300-410
Exam Name: Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI)
Date: Jan 10, 2024
File Size: 29 MB
Downloads: 50
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAMFILESCOM

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
The network administrator must configure R1 to authenticate Telnet connections based on Cisco ISE using RADIUS. ISE has been configured with an IP address of 192.168.1.5 and with a network device pointing toward R1 (192.168.1.1) with a shared secret password of Cisco123. The administrator has configured this on R1:
aaa new-model 
! 
radius server ISE1 
address ipv4 192.168.1.5 
key Cisco123 
! 
aaa group server tacacs+ RAD-SERV 
server name ISE1 
! 
aaa authentication login default group RAD-SERV 
The network administrator cannot authenticate to access R1 based on ISE. Which set of configurations fixes the issue?
  1. line vty 0 4 
    login authentication default
  2. line vty 0 4 
    login authentication RAD-SERV
  3. aaa group server radius RAD-SERV 
    server name ISE1
  4. aaa group server tacacs+ ISE1 
    server name RAD-SERV
Correct answer: C
Question 2
Refer to the exhibit. 
    
An engineer noticed that the router log messages do not have any information about when the event occurred. Which action should the engineer take when enabling service time stamps to improve the logging functionality at a granular level?
  1. Configure the debug uptime option
  2. Configure the msec option
  3. Configure the timezone option
  4. Configure the log uptime option
Correct answer: D
Question 3
Refer to the exhibit. 
    
A network engineer received a call from the vendor for a failed attempt to remotely log in to their managed router loopback interface from 192.168.40.15. 
Which action must the network engineer take to resolve the issue? 
  1. The IP access list VENDOR must be applied to interface loopback 100.
  2. The source IP summarization must be updated to include the vendor source IP address.
  3. The EIGRP configuration must be updated to include a network statement for loopback 100.
  4. The time-range configuration must be changed to use absolute instead of periodic.
Correct answer: B
Question 4
The IPv6 network is under attack by an unknown source that is neither in the binding table nor learned through neighbor discovery. Which feature helps prevent the attack?
  1. IPv6 Destination Guard
  2. IPv6 Prefix Guard
  3. IPv6 Router Advertisement Guard
  4. IPv6 Snooping
Correct answer: A
Question 5
Refer to the exhibit. 
    
An engineer configures two ASBRs, 10.4.17.6 and 10.4.15.5, in an OSPF network to redistribute routes from EIGRP. However, both ASBRs show the EIGRP routes as equal costs even though the next-hop router 10.4.17.6 is closer to R1. How should the network traffic to the EIGRP prefixes be sent via 10.4.17.6?
  1. The administrative distance should be raised to 120 from the ASBR 10.4.15.5.
  2. The ASBR 104.176 should assign a tag to match and assign a lower metric on R1.
  3. The administrative distance should be raised to 120 from the ASBR 104.17.6
  4. The redistributed prefixes should be advertised as Type 1
Correct answer: D
Question 6
What is the purpose of an OSPF sham-link?
  1. to correct OSPF backdoor routing when OSPF is used as the PE-CE connection protocol in an MPLS VPN network
  2. to allow inter-area routing when OSPF is used as the PE-CE connection protocol in a MPLS VPN network
  3. to correct OSPF backdoor routing when OSPF is used as the PE-PE connection protocol in an MPLS VPN network
  4. to allow intra-area routing when OSPF is used as the PE-CE connection protocol in an MPLS VPN network
Correct answer: A
Question 7
Refer to the exhibit. 
    
A network administrator is troubleshooting OSPF adjacency issue by going through the console logs in the router, but due to an overwhelming log messages stream, it is impossible to capture the problem. Which two commands reduce console log messages to relevant OSPF neighbor problem details so that the issue can be resolved? (Choose two)
  1. debug condition all
  2. debug condition ip
  3. debug condition session-id ADJCHG
  4. debug condition ospf neighbor
  5. debug condition interface
Correct answer: CE
Question 8
Refer to the exhibit. 
    
A shoe retail company implemented the uRPF solution for an antispoofing attack. A network engineer received the call that the branch A server is under an IP spoofing attack. Which configuration must be implemented to resolve the attack? 
  1. R4 
    interface ethernet0/1 
    ip unicast RPF check reachable-via any allow-default alllow-self-ping
  2. R3 
    interface ethernet0/1 
    ip unicast RPF check reachable-via any allow default alllow-self-ping
  3. R3 
    interface ethernet0/1 
    ip verify unicast source reachable-via any allow-default allow-self-ping
  4. R4 
    interface ethernet0/1 
    ip verify unicast source reachable-via any allow-default allow-self-ping
Correct answer: C
Question 9
Refer to the exhibit. 
router ospfv3 1 
router-id 10.1.1.1 
address-family ipv4 unicast 
passive-interface Loopback0 
exit-address-family 
address-family ipv6 unicast 
passive-interface Loopback0 
exit-address-family 
interface Loopback0 
ip address 10.1.1.1 255.255.255.255 
ipv6 address 2001:DB8::1/64
ospfv3 10 ipv4 area 10 
ospfv3 10 ipv6 area 0 
interface GigabitEthernet2 
ip address 10.10.10.1 255.255.255.0 
ipv6 enable 
ospfv3 10 ipv4 area 10 
ospfv3 10 ipv6 area 0 
An administrator must configure the router with OSPF for IPv4 and IPv6 networks under a single process. The OSPF adjacencies are not established and did not meet the requirement. Which action resolves the issue?
  1. Replace OSPF process 10 on the interfaces with OSPF process 1 for the IPv4 address, and remove process 10 from the global configuration
  2. Replace OSPF process 10 on the interfaces with OSPF process 1, and remove process 10 from the global configuration 
  3. Replace OSPF process 10 on the interfaces with OSPF process 1, and configure an additional router ID with IPv6 address
  4. Option is missing. B is right answer so don't worry about this missing option.
Correct answer: B
Question 10
Refer to the exhibit. 
    
Bangkok is using ECMP to reach the 172.20.2.0/24 network. The network administrator must configure it in such a way that traffic from 172.16.2.0/24 network uses the Singapore router as the preferred route. Which set of configurations accomplishes this task?
  1. Bangkok 
    access-list 101 permit ip 172.16.2.0 0.0.0.255 172.20.2.0 0.0.0.255 
    ! 
    route-map PBR1 permit 10 
    match ip address 101 
    set ip next-hop 172.19.1.2 
    ! 
    interface Ethernet0/2 
    ip policy route-map PBR1
  2. Dubai 
    access-list 101 permit ip 172.16.2.0 0.0.0.255 172.20.2.0 0.0.0.255 
    ! 
    route-map PBR1 permit 10 
    match ip address 101 
    set ip next-hop 172.19.1.2 
    ! 
    interface Ethernet0/0 
    ip policy route-map PBR1
  3. Bangkok 
    access-list 101 permit ip 172.16.2.0 0.0.0.255 172.20.2.0 0.0.0.265 
    ! 
    route-map PBR1 permit 10 
    match ip address 101 
    set ip next-hop 172.19.1.2 
    ! 
    interface Ethernet0/1 
    ip policy route-map PBR1
  4. Dubai 
    access-list 101 permit ip 172.16.2.0 0.0.0.255 172.20.2.0 0.0.0.255 
    ! 
    route-map PBR1 permit 10 
    match ip address 101 
    set ip next-hop 172.19.1.2 
    set ip next-hop peer-address 
    ! 
    interface Ethernet0/1 
    ip policy route-map PBR1
Correct answer: A
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!